Apollo Amplifier 5000W
Apollo Amplifier 5000W
1-channel power amplifier Pride Apollo 5000W. Suitable for subwoofer up to 5000 Watts RMS.
This model will be an excellent choice in systems where 3-4 speakers are installed, for example, Pride HP / MT series, or a pair of Pride Tv.3 / Sv.3 speakers
The rated power of the Pride Appolo is 5,000 watts per 1 ohm load, at a voltage of 14.4 V and a distortion level of the output signal of 1%.
It can work both in bridge mode and in array mode (link). Without fear, it is possible to connect to a load with a resistance of 0.5 Ohms if it is a subwoofer speaker whose DC resistance of the voice coils is not lower than the indicated mark.
Range of reproduced frequencies, Hz 15 – 270
RMS rated power of 1 ohm, number of channels x W 2 x 5000
RMS rated power of 2 ohms, number of channels x W 4 x 3000
RMS rated power at 4 ohms, number of channels x W 4 x 1700
Developed and designed on the basis of Korean Circuitry with the completion of Russian engineers.
Excellent solution for powerful subwoofers and high-quality sound for many years of work.
Physical feature | |
---|---|
Length | 560 mm |
Height | 66 mm |
Width | 220 mm |
Color | Black |
Technical feature | |
---|---|
1 Ohm Power | 5000 W |
2 Ohm Power | 3000 W |
4 Ohm Power | 1700 W |
Frequency Response | 15Hz - 270 Hz |
Signal to Noise | 85 dB |
Efficiency @ 4ohm | Over 90% |
Damping Factor | > 200 |
Input Sensitivity | 6V-0,2V |
Subsonic Filter | 10 Hz - 50 Hz |
Bass Boost | 0-9 dB |
Remote Control with indication of exceeding the distortion | Included |
Low Pass Filter | 35 Hz - 250 Hz |
Phase | 0-180 degree |
Strap Connection | Yes |
Fuse Rating | 450 A |